EPEVER Tracer Series MPPT 40A 30A 20A 10A Solar Charger Controller LCD 12V24V High Efficiency Auto Solar Regulator 4210AN 3210AN 2210AN

Overview:

Tracer AN Series. Based on common negative design and advanced MPPT control algorithm, with LCD display showing working status, this product is artistic, economical and practical. By further improving the MPPT control algorithm, Tracer AN Series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of PV array and obtain maximum energy from solar modules under any condition; and can increase the energy utilization ratio in solar system by 10%-30% compared with a PWM charging method. The charging power and current limiting function and automatic charging power reduction function improve the working stability even connecting large-size PV modules and in high temperature, and increase the professional protection chip for communication port, further improving the reliability and meeting different application requirements.

Characteristics :

Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiency

Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time

Wide MPP operating voltage range

High quality components, perfecting system performance, with a maximum conversion efficiency of 98%.

Accurate recognition and tracking of the maximum power point of multiple peaks

International famous brands of ST and IR components with high quality and low failure rate are used, which can ensure the service life of the product.

Current and charging power limiting function

Compatible with lead-acid and lithium-ion batteries

Battery temperature compensation function

Real-time power statistics function.

Overheat power reduction function

Multiple charging working modes

The communication port adopts professional protection chip, which can provide 5VDC power supply and has overcurrent and short circuit protection.

With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

Monitor and configure parameters via mobile phone APP or PC software

Full load operation without any drop in capacity within the working ambient temperature range

Extensive electronic protection

Technical Specifications:

Item	Tracer 1206AN	Tracer 2206AN	Tracer 1210AN	Tracer 2210AN	Tracer 3210AN	Tracer 4210AN
System voltage	12V/24VDC Auto
charge current	10A	20A	10A	20A	30A	40A
discharge current	10A	20A	10A	20A	30A	40A
Battery voltage range	8~32V
Max. PV open circuit voltage	46V		92V
MPP voltage range	(Battery voltage +2V)~36V		(Battery voltage +2V)~72V
Max. PV input power	130W/12V 260W/24V	260W/12V 520W/24V	130W/12V 260W/24V	260W/12V 520W/24V	390W/12V 780W/24V	520W/12V 1040W/24V
Self-consumption	<=12mA
Discharge circuit voltage drop	<=0.23V
Temperature compensation coefficient	-3mV/°C/2V (Default)
Grounding	Common negative
RS485 interface	5VDC/100mA
LCD backlight time	60S (Default)
Environmental Parameters
Working environment temperature	-25°C~+50°C(100% input and output)
Storage temperature range	-20°C~+70°C
Relative humidity	<=95%, NC
Enclosure	IP30
Dimension	172x139 x 44mm	220x154x 52mm	172x139 x 44mm	220x154x 52mm	228x164x55mm	252x180x63mm
Mounting dimensions	130x130mm	170x145mm	130x130mm	170x145mm	170x164mm	210x171mm
Terminal	12AWG(4mm 2 )	6AWG(16mm 2 )	12AWG(4mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2
Recommended cable	12AWG(4mm 2 )	10AWG(6mm 2 )	12AWG(4mm 2 )	10AWG(6mm 2 )	8AWG(10mm 2 )	6AWG(16mm 2 )
Weight	0.57kg	0.94kg	0.57kg	0.94kg	1.26kg	1.65kg

Product Photos：